High and low voltage transformer shell installation.

The shell of the high and low voltage transformer is also very important. The outer shell of the transformer has a certain protective effect on the circuits and wires between the internal parts. In normal installation, we always ignore the installation of the transformer housing. However, in fact, the installation of the transformer housing is very important. If the transformer shell is not installed in place, accidents are likely to occur and the transformer will be damaged. The installation of the transformer housing is also very important.

The installation of the transformer shell has a certain degree of technicality, and its line is divided into upper and lower line entry methods, and there are certain requirements for the position, there can be no mistakes. The high and low voltage sides of the transformer can adopt the upper or lower wiring mode. The upper part of the shell is reserved for the connection port. When the lower part is connected, there is a cable clamp on the shell to fix the wiring cable. Installation conditions In addition to meeting the installation conditions of the transformer mainframe, the bottom of the housing should be on the same level as the bottom of the transformer (with the small wheels removed), and there are also certain requirements for the relative position between the mainframe and the housing.